• Relay Receivers

    The receivers below apply relay(s) as switch(es), through the received signals the relay is activated. Normally the supply terminals and load terminals are separate from each other, and supply voltage is 12VDC, load is DC or AC. Also we can supply receiver with AC supply, as there is restricting standard in USA and Europe,  receiver need be re-designed and manufactured according to the rules. There are 20 frequencies more selectable with the receiving modules (from 260MHz to 440MHz), most of the receiver apply decoder PT2272, PT2294, SC2272, CS2272 etc. , with excellent performance.

     

    Model No. Output Mode
    RR1-L Latch
    RR1-M Momentary
    RR1-T Toggle
    Single Channel Receiver series, 5 pin wiring terminal, normally open and normally close output terminals.
    Code Type: Fixed Code
    Output Mode: Latch/Momentary/Toggle, Separate
    Supply Power: 12VDC
    Quiescent Current: 8mA
    Operation Current: 25mA less
    Relay: 3A 220VAC, 3A 30VDC
    Dimension: 38mm×28mm×15mm
    The matching transmitter: Single channel transmitter for Momentary receiver and Toggle receiver, Double channel transmitter for Latch receiver.
     
    Model No. Output Mode

    RR1LN

    RR1LNC

    Latch On
    Latch Off
    Momentary
    Toggle
    Magic 1CH / Magic 1CH C, Single Channel Receiver series, Learning Code type, 4 control modes are built in the same unit. Among RR1LNC is FCC compliant. Click the picture left to see further detail information.
    Code Type: Learning Code
    Output Mode: Latch On/Latch Off/Momentary/Toggle
    Supply Power: 12VDC
    Quiescent Current: 8mA
    Operation Current: 25mA or so
    Relay: 10A 28VDC/7A 240VAC
    Dimension: 38mm×28mm×20mm
    The matching transmitter: All RFRemotech OOK transmitters/remotes are compatible with the receivers.
     

    Model No. Output Mode
    RR2-L Latch
    RR2-M Momentary
    RR2-T Toggle
    2 Channel Receiver series, normally open output terminals, common pole terminal.
    Code Type: Fixed Code
    Output Mode: Latch/Momentary/Toggle, Separate
    Supply Power: 12VDC
    Quiescent Current: 6mA
    Relay: 20A 12VDC(NO), 12A 14VDC(NC), 7A 120VAC
    Dimension: 68mm×38mm×19mm
    Any of 2 channel transmitter is compatible with the receivers.
     
    Model No. Output Mode

    RR2LN

    RR2LNC

    Latch On
    Latch Off
    Momentary
    Toggle
    Magic 2CH / Magic 2CH C, Two Channel Receiver series, Learning Code type, 4 control modes are built in the same unit. Among RR2LNC is FCC compliant. Click the picture left to see further detail information.
    Code Type: Learning Code
    Output Mode: Latch On/Latch Off/Momentary/Toggle
    Supply Power: 12VDC
    Quiescent Current: 8mA
    Operation Current: 25mA or so
    Relay: 10A 28VDC/7A 240VAC
    Dimension: 54mm x 39mm x 20mm
    The matching transmitter: All RFRemotech OOK transmitters/remotes are compatible with the receivers.
     

    Model No. Output Mode
    RR4-L Latch
    RR4-M Momentary
    RR4-T Toggle
    4 Channel Receiver series, normally open and normally close output terminals.
    Code Type: Fixed Code
    Output Mode: Latch/Momentary/Toggle, Separate
    Supply Power: 12VDC
    Quiescent Current: 7mA
    Relay: 3A 220VAC, 3A 30VDC
    Dimension: 62mm×39mm×15mm
    Any of 4 channel transmitter is compatible with the receivers.
     

    Model No. Output Mode
    RR6-L Latch
    RR6-M Momentary
    6 Channel Receiver series, normally open output terminals, common pole terminal.
    Code Type: Fixed Code
    Output Mode: Latch/Momentary, Separate
    Supply Power: 12VDC
    Quiescent Current: 8mA
    Relay: 20A 12VDC(NO), 12A 14VDC(NC), 7A 120VAC
    Dimension: 68mm×50mm×18mm
    6 channel transmitters are compatible with the receivers. Normally the ranges of matching transmitter are 500m, 1000m, 2000m.
     

    Model No. Output Mode
    RR8-L Latch
    RR8-M Momentary
    RR8-T Toggle
    RR8-4M4T 4Momentary 4Toggle
    8 Channel Receiver series, normally open output terminals, common pole terminal.
    Code Type: Fixed Code
    Output Mode: Latch/Momentary/Toggle, Separate
    Supply Power: 12VDC
    Quiescent Current: 8mA
    Operation Current: 25mA less
    Relay: 20A 12VDC(NO), 12A 14VDC(NC), 7A 120VAC
    Dimension: 38mm×28mm×15mm
    8 channel transmitters are compatible with the receivers. Normally the ranges of matching transmitter are 500m, 1000m, 2000m. The microchip is exchangeable for the application of different output modes, see Technical Support for the detail.
     

    Model No. Output Mode
    RR12-L Latch
    RR12-MT Momentary/Toggle
    RR12-6M6T 6Momentary 6Toggle
    RR12-8M4L 8Momentary 4Latch
    12 Channel Receiver series, normally open and normally close output terminals.
    Code Type: Fixed Code
    Output Mode: Latch/Momentary/Toggle, among Momentary and Toggle are built in the same PCB
    Supply Power: 12VDC
    Quiescent Current: 8mA
    Relay: 20A 12VDC(NO), 12A 14VDC(NC), 7A 120VAC
    Dimension: 38mm×28mm×15mm
    12 channel transmitters are compatible with the receivers. Normally the ranges of matching transmitter are 500m, 1000m, 2000m. The microchip is exchangeable for the application of different output modes, see Technical Support for the detail.
     
    Please Notes:

    The Transmitting Ranges above are based on that transmitter and receiver are placed in a open space and there is no obstacle between the both units, and the placed height is more than 1.5 meters above the ground.

    Only oscillating resistances of transmitting unit and receiving unit are matching to each other, and the codes of both are the same, the transmitting unit will be compatible with the receiving units. Please go to Technical Support for the details.

    In order to keep security and anti-jam of operating, the matching transmitting unit(s) and receiving unit(s) should be encoded/decoded.


    The matching transmitters (Click to see)
     
Safe, easy & reliable, with remote controllable service. Copyright © 2017 Guangzhou Aifusheng Electronic Technology Co., Ltd. All rights reserved.